Little Giant OA1S Serie Manual Del Propietário página 4

OPERATION TESTING
Electrical Connections
5. Plug the power supply into a 120 VAC 50/60 Hz outlet.
• Make sure the outlet is on a separate circuit breaker from any other device and not on a switched
receptacle.
6. Plug the power cord quick connect into the incoming power receptacle of the alarm panel.
• The green power LED should illuminate.
OPERATION TESTING
NOTE: Test product weekly to ensure system integrity.
1. Press and hold the Alarm Test button.
• Alarm LEDs, alarm buzzer, and auxiliary contacts
will activate.
2. Press the Alarm Silence button while still pressing the
Alarm Test button.
• The buzzer will go silent while the LEDs remain lit.
3. Release the Alarm Test button.
NOTE: The alarm panel will auto reset for the next
alarm cycle.
For technical assistance, parts, or repair, please contact:
800.701.7894 | littlegiant.com
10000015086 Rev. 000 06/23
Franklin Electric Co., Inc. | Oklahoma City, OK 73157-2010
Copyright © 2023, Franklin Electric, Co., Inc. All rights reserved.
2