Publicidad
Idiomas disponibles
Idiomas disponibles
SLIMMY
KEEP THESE INSTRUCTIONS. ARTICLE ONLY FOR HOME USE.
Caution: The appliance can only be repaired by authorized specialists, as unauthorized repairs can cause damage. If a fault
occurs, contact the store where the product was purchased.
WARNINGS REGARDING BATTERIES
Indications for safely removing / replacing the battery:
Do not expose batteries to excessive humidity or heat.
-
Do not allow batteries to come into contact with liquids.
-
Keep batteries at a safe distance from magnetic fields, heat sources and open flames.
-
Do not reverse the polarity of the batteries or short-circuit them.
-
Replace the batteries only with others of the same type or equivalent.
-
-
TECHNICAL SPECIFICATIONS
Power: 1 CR2032 lithium bttery
Maximum capacity: 5kg
FEATURES
1. Indicate volume of water and milk
2. Two weight unit systems: g e Lb:0z convertible
3. Two volume unit systems: ml e fl:0z convertible
4. Low battery power / Overload indication
5. With high precision strain gauge sensor
6. With zero, tare function
7. Auto off
TO INSTALL OR REPLACE BATTERY
The battery type of scale depends on the product structure. Find the battery type of your scale accoding to the following
pictures, then install and replace battery as described.
1.
1x3V CR2032 lithium battery (included). Remove isolation sheet before use.
2.
2x1.5V (AA / AAA) batteries (excluded). Remove packaging foil before use.
LCD
Open the battery case cover at the bottomo of scale:
A.
Take out the used battery with the aid of a sharp object, as shown in picture.
B.
Install new battery by putting one side of the battery beneath the battery baffle and then
pressing down the other side.
A.
Take out used batteries, with the aid of a sharp object if needed.
B.
Install new batteries by putting one side of the battery down first and pressing down the
side (please observe the polarity).
7
English
Publicidad
