Publicidad
Idiomas disponibles
Idiomas disponibles
English
1
Voltage, frequency
2
For indoor and outdoor use
3
Colour rendering index
4
Device classes
5
Service life
6
ON/OFF cycles
7
International protection class
These instructions for use are for the products listed above only.
They contain important information about using the product for the first time and handling the LED spotlight.
You should therefore pay close attention to these instructions for use, even if you pass the product on to third parties.
It is therefore important that these instructions are carefully filed for future reference.
Introduction
Dear customer, thank you for deciding to purchase our product.
You have purchased a product from WERKAPRO , which has been built using state-of-the-art technology. The LED
floodlight complies with the requirements of current European and national directives.
To maintain the condition of the product and ensure safe operation, you - as the user - must comply with the
instructions in this user manual!
Safety instructions
-
The warranty becomes invalid if any damage occurs as a result of failure to comply with these instructions for
use!
-
We accept no liability for consequential damage!
-
The light source of the lamp cannot be replaced, please replace a completely new lamp if the light source is
broken.
-
Do not allow the LED projector to come into contact with extreme heat or open flames.
-
The entire product must not be altered or modified. Modifications to the LED floodlight will invalidate the
warranty.
-
The nameplate must not be removed.
Appropriate use
The LED floodlight is designed for use in indoor/outdoor areas.
8
Does not work with a dimmer switch
9
Lighting angle
10
Minimum distance from the object to be lit
11
Operating temperature
12
Replace defective lamp cover immediately
13
Do not use as accent lighting
14
Mercury-free
Publicidad
