Publicidad
Idiomas disponibles
Idiomas disponibles
3. TECHNICAL CHARACTERISTICS
Below is an example of the nameplate:
The name plate attached to the inside or rear of the appliance (depending on the model) includes all the
information specific to your wine cellar.
We recommend that you make a note of its serial number in this booklet prior to installation, so that you can
refer to it later (technical work, request for assistance, etc.)
Once it is installed and loaded, access to it is not so easy.
CAUTION: No assistance can be provided without this information.
4. INSTALLATION INSTRUCTIONS
Before using your wine cellar
• Remove the inner and outer packaging. Remove your wine cellar from the transport pallet by unscrewing
the two screws on the frame at the back of the device.
• Before connecting the cellar to the electrical socket, leave it in position for 24 hours. This will reduce the
possibility of malfunction of the refrigeration circuit due to transport.
• Clean the inside using a soft cloth and lukewarm water.
Using your wine cellar:
Your wine cellar must be positioned in a room with an ambient temperature between +10°C and
+32°C. Alternatively, if the cellar is fitted with the winter system, the range is extended to 0°C to 32°C.
28
Publicidad
