Descargar Imprimir esta página

Sime LINKER PLUS Manual De Instalacion Y Uso página 35

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
4.2.2
Guided configuration
After confirming the choice of the "Guided configuration" dur-
ing the initial start-up, perform the following operations:
– use the
>
or
<
key to select "Yes"
– press the
!
key to confirm
Guided config
Configure internet con-
nection?
No
Yes
The "Configuration via App" screens will appear:
Configuration via App
WiFi state: Not configured
Available for App connection
Back
At this point, the remote control unit and the application will be
ready for being paired.
Guided config
Configure with
SIME app?
No
Yes
Stop
– use the
>
or
<
key to press "Start"
!
– press the
key to confirm the pairing procedure automati-
cally; the operation may take a few minutes
Configuration via App
WiFi state: Connected
Touch START to begin
Back
the "back" key can be used to return to the previous
NOTE:
screen.
4.2.3
Configuration via the Wi-Fi menu
If, during the initial start-up, the user declined to proceed with
the "Guided configuration" and the remote control unit must be
paired at a later stage, perform the following operations:
– from the "Main Screen" press the
selection screen and use the
confirm with the key
!
Fri 20 December 2023
Mode
Zone
Menu
WiFi
Start
!
key to access the menu
>
or
<
key to select "Wi-Fi" then
10:45
[...]
[...]
[...]
[...]
35

Publicidad

loading

Este manual también es adecuado para:

8118921