BATTERY STATUS
EN
~100 % – 75 %:
~75 % – 50 %:
~50 % – 25 %:
~25 % – 0 %:
CHARGING
Vehicle Charger (Optional)
For VEPAC equipped units
Input 12 – 30V DC
Mains Adaptor (Optional)
For VEPAC equipped units
Input 100 – 240V AC
Mains Charger* (Optional)
For units without VEPAC
Input 100 – 240V AC
CHARGING STATUS
SEALED LEAD ACID (SLA) K10
~0 % - 80 %:
~80 % - 100 %:
~100 %:
SEALED LEAD ACID (SLA) K10
WITH VEPAC
~0 % - 80 %:
~80 % - 100 %:
~100 %:
LITHIUM K10 WITH VEPAC
~0 % - 80 %:
~80 % - 100 %:
~100 %:
Charge Standby:
6
LED = Green
LED = Amber
LED = Red
LED = Flashing Red
LED = Red
LED = Amber
LED = Green
LED = Red
LED = Flashing Red
LED = Green
LED = Red
LED = Amber
LED = Green
LED = Flashing Green
A
B
C
For SLA K10 units without an in-built VEPAC charger.
If the unit does not have an LED at the position
shown above it will need to be charged with a mains
charger (C). Charging status colours are shown on the
external charger.
For SLA K10 units with an in-built VEPAC charger. If
the unit has an LED at the position shown above the
in-built charger can be powered by either a mains
adaptor (B) or a vehicle charger (A). Charging status
colours are shown on the K10 at the position shown
above.
For Lithium K10 units which all have an in-built VEPAC
charger as standard. The in-built charger can be
powered by either a mains adaptor (B) or a vehicle
charger (A). Charging status colours are shown on the
K10 at the position shown above.
* Only for SLA battery equipped units
LED
VEPAC LED