Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before assembling Creeper, make sure all parts are present. Compare parts with package contents list. If
any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer
service for replacement parts.
ASSEMBLY
1. Knock the plastic end caps(NO.3) into the holes
of two metal frames(NO.2) and the metal frame
base(NO.6).
2. Put the plastic tray (NO.5) onto the metal frame
base (NO.6) and align the holes, then attach the
four caster assemblies(NO.7) and tighten all four
nuts.
3. Use hex bolts(NO.7),washers(NO.9) and acorn
cap nuts(NO.10) to connect the two metal
frames(NO.2) to the metal frame base(NO.6)
4. Put the flat steel frame supports ( NO.11) on the
metal frames(NO.2) horizontally, then connect
the seat pad, flat steel frame supports (NO.11)
and metal frames(NO.2) with four cross-recess
screws(NO.4).
5. Assembly is now complete.
5
7
Publicidad
