Publicidad
Idiomas disponibles
Idiomas disponibles
CALEFACTOR DE TORRE
C/OSCILACION
PTC tower heater 2702
1. Please check before you use:
A: The heating element and electric wire cannot be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
3. Function for control panel:
Checking and installation before use:
1. Whether all parts and components are intact, whether the heating body is broken and broken, and
whether the power line is damaged
2. Check whether the parts in the packing box are consistent with the packing list in the manual
3. This product requires 110V ~ 50Hz power socket with current above 10A. Please use it after
confirmation.
1. Before use, check whether the power supply used is consistent with the mark on the nameplate of
the machine, and whether the power cord and plug are damaged.
2. Non full time personnel or unauthorized repairmen are not allowed to repair or report the machine
on their own, so as to avoid dange.
3. In order to ensure the use effect and product performance of this machine, do not use this machine
in plateau areas.
4. Turn off the power before pulling out the plug. Do not plug in and out the power plug with wet
hands to avoid electric shock.
5. It is forbidden to use in places where inflammable and explosive articles are stored, so as to avoid
safety accidents such as fire and electric shock.
USAGE
1. Connect the power supply, rotate the switch knob.
1.1"OFF"：Off.
：Fan.
1.2
1.3 "I"：Low heat.
1.4 "II"：High heat.
1.5 "MIN"to"MAX":It adjusted heating temperature.You can rotate the
knob to get your desired heating temperature.
2. The appliance tilt or base leave the ground, power will cut off
automatically
INSTALLATION AND OPERATION INSTRUCTIONS
NOTICES
9
INSTRUCTION MANUAL
Publicidad
