Vivo Y83 Manual Del Usuario página 6

Screen Operation:
Slide up and down, left and right
(3) Turn on/off
Turn on: when the device is off status, long press the key button for 4
seconds to turn it on and enter the time interface, After 5 seconds
without operation, the device will turn off the screen automatically and
enter the stand by mode.
Turn off: Long press the side button for 4 seconds and slide the screen to
turn off the smartwatch.
(4) Function
interface
Press the side button
to enter the function
selection interface,
slide up and down to
select the desired
function for
operation, and then
press the side button
to return to the main
interface.
Do-not-disturb
mode
Device
Information
Swipe down the screen from the top of the screen and
tap on the communication function. It is only by tapping
the switch for Bluetooth audio that you can allow the
sound of media audio to be played through the watch
only. If you do not want the sound of media audio to be
played through the smartwatch, tap the switch for
Bluetooth audio to turn this function off.
-4-
(2)Screen drop-down interface
function introduction
(5) Steps, calories and
miles
Enter the step counting
screen, which displays the
current step count, target
progress, calories and
distance for the day. the
screen will turn off after 5
seconds. The number of
steps detected by the
acceleration sensor has a
small error (within 10%)
within a reasonable range.
Communication
Settings