Publicidad
Idiomas disponibles
Idiomas disponibles
6.
If any abnormality is found during use of this product, please refer to the following table.
Error
The floor washer
does not work or
alarm is active
Product suction is
weakened
Abnormal fan noise
Floor brush does not
spray water
Water leakage at the
air outlet
Water leakage at the
bottom of the floor
brush
For other failures that cannot be resolved, please contact your local after-sales service
outlet or call the nationwide service hotline.
Maintenance and Repair
Possible Causes
1.
The roller brush is entangled
with hair or foreign objects
2.
Wastewater tank full
3.
Battery is low
1.
The roller brush, roller brush
cover and/or wastewater tank is
not properly installed
2.
The roller brush is entangled
with hair or foreign objects
3.The suction port or pipe is
blocked
4.
The filter above the float is dirty
5.
The wastewater tank filter is
dirty or missing
1.
The nozzle opening is blocked
2.
Wastewater is full
1.
Lack of water in the clean water
tank
2.
The clean water tank is not
properly installed
1.
Float not installed
2.
Wastewater tank filter not dried
after cleaning
Wastewater tank or wastewater
tank filter not installed
1.
Clean the roller brush after
shutdown
2.
Clean the wastewater tank
3. Charge
1.
Re-install
2. Clean the roller brush
3.
Clear obstructions in the
suction port or pipe
4. Use after cleaning the filter
5.
Clean or install filter before
use
1.
Clear foreign objects in the
suction port
2.
Take out wastewater tank
and pour away wastewater
before using
1.
Refill the clean water tank
2.
Reinstall the water tank
1.
Install float
2.Wash and dry thoroughly
before use
Install wastewater tank and
filter
14
Solution
EN
Publicidad
