2. MAINTENANCE
2.1.
To flush the pressure regulator
We recommend flushing the pressure regulator once a month.
1. Close the water supply.
2. Remove the cap
3. Open the water supply for approx. 5 seconds.
4. Close the water supply
This cleans the filter
If the filter is still dirty, repeat the last two steps.
5. Mount the cap
4
6. Open the water supply for further operation.
2.2. To clean the pressure regulator
We recommend cleaning the pressure regulator manually once a year.
1. Close the water supply.
2. Open the housing ring
3. Remove the filter
4. Rinse the filter
2
5. Insert the filter
2
6. Mount the housing ring
7. Open the water supply for further operation.
1
.
4
of coarse dirt.
2
.
.
3
carefully.
2
thoroughly with clean water.
into the pressure regulator.
and tighten it hand-tight.
3
3
2
– 20 –
4