Channel Scan; Direct Access Tuning - Kenwood KDC-BT645U Manual De Instrucciones

Channel Scan

Every receivable Channel is checked for 10 seconds.
1
Enter Channel Scan mode
Press the [ ] button for at least 1 second.
2
Release it when the channel you want to listen
to is received
Press the [ ] button.
Function of remote control

Direct Access Tuning

Entering the channel and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button.
2
Enter the channel
Press the number buttons.
3
Tune in to the entered channel
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [ ] button.
⁄
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
• If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
"ACQUIRING SIGNAL"/ "NO SIGNAL" appears.
29
|
English