Publicidad
Idiomas disponibles
Idiomas disponibles
Ash Vacuum cleaner Use instructions
ASSEMBLING VACUUM CLEANER
Always remove the plug from the power socket before fitting or removing accessories.
A) Take all the accessory out
B) Put the tube to the handle of hose
C) Fitting the flexible hose
Insert flexible hose into the air intake duct.
INSTRUCTIONS FOR USE
After assembling the product check that the plug is not damaged and plug it in the socket. Press the 0/I button
to switch the appliance on.
To activate the blowing function insert the hose into the duct on the cover of the product then press the button 0/I.
IF YOU HEAR ANY UNUSUAL NOISES, SWITCH OFF THE PRODUCT IMMEDIATELY.
AFTER USE
Press the 0/I button to switch the appliance off and remove the plug from the socket.
Release the flexible hose firmly from the air intake duct. Then to dump the dust from the collect tank .
MAINTENANCE
It is important to keep the filters clean to improve the efficiency and the life of the product.
CLEANING FILTER Fig.B
Make sure the product is off (the button must be set to 0).
Open the closure hooks and remove the filter.
Wash the filter by rinsing it in plenty of running water from inside the filter to the outside.
Do not put in the washing machine. Help with a brush.
Filter should be cleaned at least twice a month .
CLEANING THE APPLIANCE
Before cleaning the product, turn it off and pull the plug out of the power socket.
It can be cleaned with a slightly dampened soft cloth with warm water.
Do not clean with diluents, abrasive products in general, detergents for plastic, glass or the like.
Be careful not to penetrate liquids.
TECHNICAL DATA
Power: 1000W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
9
EN
Publicidad
