LG -E976 Guia De Inicio Rapido página 6

Setup
Before you start using the phone, you may need to insert the Micro-SIM card.
Installing the Micro-SIM card
Eject button aperture
NOTE: Make sure the golden contact area on the card is facing downwards.
2
The eject button is a small round aperture just above the
tray door. To install a new Micro-SIM card:
1. Insert the Micro-SIM ejection tool that comes with the
phone (or a thin pin) into the eject button aperture, and
push firmly but gently until the tray pops out.
2. Remove the tray and place the Micro-SIM card inside it,
with the contacts out and the angled corner to the right.
There is only one possible way to fit the card snugly into
the tray.
3. Carefully reposition the tray in the slot and push it gently
back into the phone.