Please use the original cable supplied with your device for
charging. The power bank will commence charging your device
once they are connected. Unplug the charging cable after the
devices is fully charged. Charging time varies per device and cable
speed.
To charge the power bank use the cable provided. The blue
indicator light will flash when charging is in progress. The indicator
lights are permanently lit when the power bank is fully charged.
Charging time varies depending on the power source selected for
charging.
Check battery capacity in power bank:
Short press the button to check if the power bank needs to be
recharged. The Blue LED lights indicate battery capacity remaining
lit in the power bank as follows – 3 lights = 100%; 2 lights = 60%; 1
light = 30%.
Hand Warmer mode:
1. Press and hold the button for 5 seconds to enter the heating
mode and the light will turn red.
2. At the beginning of the heating mode is the lowest heat level,
press the power button to change the mode.
3. Press the button to adjust the hand warmer mode from Low to
High.
4. Turn off: Press the button twice until all red indicator lights turn
off.
5. Hand warmer usage time varies depending on the remaining
power capacity remain in the power bank and the heat setting
selected
Mode
Low – 1 light
Medium – 2
lights
High – 3 lights
Temperature
40ºC
45ºC
50ºC
Usage Time
7 hours
3-4 hours
2.5 hours