Linea 2000 DOMO DO3101 Manual De Instrucciones página 13

supplier may be held liable.
· Do not use or store this appliance
outdoors.
· Never place this appliance near a gas
stove or electrical stove or in a place
where it may come into contact with
a warm appliance.
· To protect against electrical shock or
burns, do not immerse unit, cord, or
plug in water or other liquid.
PARTS
1. Display screen
2. Temperature display
Measuring range: 0~50°C (32~122°F), accuracy ±1°C (1.8°F)
3. Humidity display
Measuring range: 10%~99%, accuracy ±5%
4. Solar panel
5. Switch °C / °F
6. Magnet
7. Pop-out foot
USE
· The sensors are in sleep mode due to lack of energy and possible
exposure to extreme circumstances during packaging and
transportation. The values will be displayed correctly only after some
time under normal use.
· The temperature can be displayed in both Celsius and Fahrenheit. You
can set this using the switch on the back.
· Open the pop-out foot at the back and place the device in the desired
position. Or use the magnet to hang the device on a ferrous surface.
· Place the device indoors in a location with sufficient light. Point the
solar panels towards the light source, which can be a window or a
lamp. You can move the device afterwards.
· Do not expose the device to direct sunlight or use it outdoors. Keep the
device away from strong electromagnetic interference.
· After 10-30 seconds, the solar panels will have fully charged and the
device displays the ambient temperature and humidity on the screen.
· The recommended ambient conditions are 22~26°C and 40%~70%.
CLEANING AND MAINTENANCE
· If necessary, clean the device using a soft or damp cloth.
· Do not clean any part of the product with benzene, thinner, solvents,
or chemicals.
· Do not submerge the device in water.
www.domo-elektro.be
13
DO3101