Publicidad
Idiomas disponibles
Idiomas disponibles
OWNER'S MANUAL | ASSEMBLY GUIDE
ASSeMBlY INSTRUCTIoNS
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
⚠
Sharp edges. Wear gloves while assembling.
Slide one (1) foot base cover {
STEP 01
Use four (4)
[AA]
bolts and four (4)
foot base {
} to the bottom of post 8 {
B
Repeat with the other post 8 {
A8
[AA]
× 20
[HH]
× 20
B
C
A8
A8
A2
Use two (2)
[AA]
bolts and two (2)
STEP 03
attach cross beam 3 {
} and cross beam 4 {
d3
[AA]
× 2
[HH]
× 2
D3
04
CAUTIoN
} onto one (1) post 8 {
C
A8
[HH]
flat washers to attach one (1)
}�
A8
}, and posts {
}, {
}, and {
}�
A7
A5
A2
A7
A5
[HH]
flat washers to
}�
d4
D4
For ease of assembly, it is recommended to have 3 or more people
and allow enough time to completely finish the assembly�
(Assembly can take 6-8 hours�)
do NoT tighten screws until all the screws and washers are properly
installed�
}�
Pull the electric cord out through the plug on post 5 {
STEP 02
Use three (3)
[KK]
plastic caps, three (3)
[dd]
flat washers to attach post 4 {
FRoNT arrows should face each other�
Repeat with post 6 {
Use three (3)
[KK]
plastic caps, three (3)
[dd]
flat washers to attach post 3 {
Repeat with post 1 {
[AA]
× 12
[dd]
× 12
[KK]
× 12
A4
A6
A3
A1
Use two (2)
STEP 04
attach cross beam 1 {
[AA]
× 2
[HH]
× 2
[AA]
bolts, and three (3)
} and post 5 {
A4
} to one (1) post 8 {
}�
A6
A8
[AA]
bolts, and three (3)
} and one (1) post 8 {
A3
} and post 2 {
}�
A1
A2
A5
ELECTRIC REQUIREMENTS:
A8
120V 60Hz
[AA]
bolts and two (2)
[HH]
flat washers to
} and cross beam 2 {
}�
d1
d2
D2
D1
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
BLACKSTONEPRODUCTS.COM/SUPPORT
Model: 6001
}�
A5
}� Note: The
A5
}�
A8
A8
A2
Publicidad
