Publicidad
Idiomas disponibles
Idiomas disponibles
- If batteries are damaged or leaking, avoid
contact with the skin or eyes. If this occurs,
immediately rinse well with water and seek
medical care.
- When you handle batteries, make sure that
your hands, the product and the batteries
are dry.
- Insert batteries with the + and - poles
pointing in the direction indicated in the
battery compartment or holder.
- Do not mix different brands and types of
batteries, do not mix new and used
batteries and do not use batteries with
different date codes.
- Remove batteries from the product if you
are not going to use it for some time.
- To avoid accidental short-circuiting of
batteries after removal, do not let battery
terminals come into contact with metal
objects (e.g. coins, hairpins, rings). Do not
wrap batteries in aluminum foil. Tape
battery terminals or put batteries in a
plastic bag before you discard them.
- Do not leave empty disposable batteries
inside the product.
SAVE THESE
INSTRUCTIONS
IMPORTANT INFORMATION
- Rinse the cutting element of the trimming
head with lukewarm water after each use
(Fig. 2).
- Be careful to always keep the cutting
element away from eyes and eyelashes.
- For hygienic reasons, the product should
only be used by one person.
- Apply gentle pressure. Pressing too hard
may cause skin irritation, and the trimmer
will not function properly.
- Do not use trimmer on sensitive areas or
irritated skin.
Introduction
Congratulations on your purchase and
welcome to Philips Norelco!
To fully benefit from the support that Philips
Norelco offers, register your product at
www.norelco.com/register.
You can find the model number printed inside
the battery compartment. You can access the
battery compartment by removing the lower
part of the handle.
The full model number (e.g. NT1234/56) is
located on the bottom of the packaging, your
receipt or order confirmation.
General Description (Fig.1)
1 Short eyebrow guard (1/8 in./3 mm)
2 Cutting element
3 Trimming head
4 'Unlocked' indication
5 Locking indicator
6 'Locked' indication
7 Handle
8 Setting indicator
9 'On' indication
10 ''Off' indication
11 'Open' indication
12 Battery compartment cover
13 AA battery
14 Cleaning brush
Preparing for use
Placing the battery
Note: Make sure your hands and product are
dry when inserting the battery.
1 To remove the battery compartment cover,
turn it clockwise (Fig. 3) until the setting
indicator points to the 'unlocked' indication
(^) (Fig. 4).
2 Pull the battery compartment cover off the
handle (Fig. 5).
3 Put the battery in the battery compartment
(Fig. 6).
Make sure the + and - poles of the battery
point in the right direction.
Note: The product operates on one
disposable 1.5 V AA alkaline battery
(included).
4 Slide the battery compartment cover back
onto the handle (Fig. 7).
5 Turn the battery compartment cover
counterclockwise until the setting indicator
points to the 'off' indication (0) (Fig. 8).
Publicidad
