Philips EP1200 Manual Del Usuario página 9

Adjusting machine settings
Programming the highest default setting of your drinks
The machine has 3 default settings for each drink: low, medium, high. You can only adjust the quantity
of the highest setting. The new quantity can be stored as soon as the start light starts to pulse.
1 To adjust the highest quantity setting, press and hold the 1-cup icon of the drink you want to adjust
for 3 seconds.
-
The drink light and the light in the 2-cup icon light up. The upper light of the drinks quantity icon
and the start light start to pulse, indicating that you are in programming mode.
2 Press the start/stop
-
The start light lights up continuously at first. When the machine is ready to store the adjusted
volume, the start light starts to pulse.
3 Press the start/stop
-
The upper light of the drinks quantity icon and the start light go off, indicating that the new
quantity has been stored.
After you have programmed the new highest default quantity for a drink, the machine will dispense
this new amount each time you select the highest quantity of both the 1-cup and 2-cup variant of this
drink.
You can only adjust the highest default quantity level.
When you adjust the volume of a drink, both the volume of the 1-cup and 2-cup variants of this
drink are adjusted.
If you want to go back to the default quantity settings, see ' Restoring factory settings'.
Adjusting the coffee temperature
1 Press the on/off button to switch off the machine.
2 When the machine is switched off: press and hold the coffee quantity icon until the lights in this
icon go on (Fig. 6).
3 Tap the quantity icon to select the required temperature: normal, high or max.
-
Respectively 1, 2 or 3 lights are on.
4 When you have finished setting the coffee temperature, press the start/stop
5 Press the on/off button to switch on the machine again.
If you do not switch off the machine yourself, it will switch off automatically after some time.
Restoring factory settings
The machine offers you the possibility to restore the drinks default settings at any moment.
You can only restore the default settings when the machine is switched off.
1 Press the on/off button to switch the machine off.
2 Press and hold the espresso icon for 3 seconds.
- The middle lights in the drink setting icons light up. The start/stop light starts to pulse, indicating
that the settings are ready to be restored.
3 Press the start/stop
button. The machine starts to brew the selected beverage.
button again when the cup contains the desired quantity of coffee.
button to confirm you want to restore the settings.
English
11
button.