PLAYKIN BENTLEY BACALAR 1300005 Manual Del Usuario página 48

SAFETY IN BATTERY CHARGING
×
Do not allow any child to charge the battery.
×
Use the battery and charger supplied with the product. Always use original batteries and chargers.
×
Do not modify the electrical system. Altering the electrical system can cause electric shock, fire, or
permanent damage to the system.
×
Explosive gases are generated during charging. Do not charge the battery near sources of heat or
flammable materials. Always load in well-ventilated areas.
×
Do not expose the battery and charger to extreme temperatures or humidity.
×
Do not open the battery. The battery contains toxic and corrosive substances.
×
Do not start charging the battery if you detect that any of the parts have been damaged.
×
Do not let the battery run out completely. Recharge the battery after each use or once a month if
not used regularly.
PRODUCT DESCRIPTION
The BENTLEY vehicle consists of two models. The difference between them lies in the drive wheels.
In model 1 the vehicle has only one drive wheel while model 2 consists of two drive wheels. On both
models, the drive wheels are located at the rear of the vehicle.
Pay special attention to the assembly section in order to identify in each case which steps to follow.
PART Nº
1 Vehicle bodywork
2 Washer Ø10
3 Normal wheel
4 Drive wheel
5 Safety nut
6 Hubcap
7 Mirror
8 Windscreen
9 Steering wheel
10 Screw M5x40
11 Nut Ø5
12 Seat
13 Ø4x16 screw
14 Key
15 Charger
16 Remote controller
PARTS LIST
NAME COMMENTS
Placed on the front and rear axles.
Placed on the front and rear axles.
Placed in the assembly package.
Left and right
Placed on the steering wheel
Placed on the steering wheel
Placed in the assembly package.
Placed in the assembly package.
If equipped, only for type R/C
48