Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
4326339COM
Wall Bed Side Storage
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Visit: www.ameriwoodhome.com
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
B344326339COM0
Tough
Publicidad
Manuales relacionados para Ameriwood HOME 4326339COM
Resumen de contenidos para Ameriwood HOME 4326339COM
- Página 1 Easy Tough Assembly Difficulty Meter WARNING Follow Ameriwood Home - Unit can tip over causing severe injury or death. - Anchor unit to stud in wall (if instructed to). - Do Not allow children to climb on unit. - Put heavy items on lower shelves or drawers.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Página 4 Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. ameriwoodhome.com...
- Página 5 Board Identification Not actual size Upper Adj Shelf Lower Adj Shelf 34326339030 34326339040 34326339050 (x2) Bottom Upper Back Panel 34326339070 Fixed Shelf 34326000080 34326339060 Left Panel Right Panel 34326339010 34326339020 Upper Door Lower Door (x2) Back Rail 34326000100 34326339110 34326339120 Stringer 34326000090 ameriwoodhome.com...
- Página 6 Board Identification Not actual size SIDE Drawer Front Drawer False Front Drawer Side Left 34326339130 39991167045415F 39991167340430L BACK SIDE Drawer Bottom Drawer Side Right Drawer Back 39991324046420D 39991167340430R 39991167045415B BACK Back Panel K4326339100 ameriwoodhome.com...
- Página 7 Board Identification Not actual size BACK SIDE BACK SIDE ameriwoodhome.com...
- Página 8 Note: Your unit may contain extra hardware. Part List Actual Size (x32) (x32) (x16) (x8) (x4) (x10) #A22620 #A22610 #A21670 #A223025 #A12810 #A54710 cam lock cam bolt wood dowel confirmat screw #8 x 1" screw wedge (x16) (x4) (x8) (x4) #A12120 #A13950 #A80250...
- Página 9 Note: Your unit may contain extra hardware. Part List Actual Size (x2) (x4) (x10) #A65685 #A65690 #A11070 euro hinge plate glissando soft close euro screw Not Actual Size (x4) (x1) #A65680 #A56541 euro hinge slide ameriwoodhome.com...
- Página 10 Note: Your unit may contain extra hardware. Part List Not Actual Size Your unit comes with four (2) drawer slides. For each slide, extend the slide as shown and press the release lever to remove the inner slide. Set the inner slide aside for later. For Step 1 and 2, you will be attaching the slide to the panels at the rear of the slide.
- Página 11 STEP 1 (x1) (x3) (x16) ameriwoodhome.com...
- Página 12 STEP 2 (x1) (x3) (x16) ameriwoodhome.com...
- Página 13 STEP 3 Quick Assembly Proper orientation of CAM LOCK (x16) (x8) ameriwoodhome.com...
- Página 14 STEP 4 Quick Assembly Proper orientation of CAM LOCK (x16) (x8) ameriwoodhome.com...
- Página 15 STEP 5 ameriwoodhome.com...
- Página 16 STEP 6 Make sure holes are facing up on back side of back rail (J) ameriwoodhome.com...
- Página 17 STEP 7 ameriwoodhome.com...
- Página 18 STEP 8 unfinished side BACK Slide back panel into grooves in the left and right panels (A & B). Line up holes in bottom of back panel with holes in the top of the back rail (J) ameriwoodhome.com...
- Página 19 STEP 9 (x4) (x4) BACK ameriwoodhome.com...
- Página 20 STEP 10 (x10) (x4) (x4) Slide the Wedges (6) in the groove against the back panel, secure with screw. Tap in Nut (14) with a hammer. Screw in Glides (13) all the way. ameriwoodhome.com...
- Página 21 The next steps are to assemble your unit to the wall Assembled unit MUST be square on the height, width, and depth to function properly Assembled unit MUST be placed flat against the wall Assembled unit MUST be screwed into wall studs at the top and bottom for safety You need to locate 2 studs DO NOT use wall anchors to fasten your unit to the wall...
- Página 22 STEP 11 Place your unit FLUSH against the wall There are notches provided at the back of your unit. These notches are to fit around the baseboard on your wall. If your baseboard is higher or thicker than the notches provided on the unit, you will need to remove the baseboard, cut it down to fit on both sides of your...
- Página 23 STEP 12 Assembled unit MUST be square on the height, width, and depth to function properly A ladder will be required. Do not lean against the top of the unit, it may cause sagging. If required, unscrew the Glides counter-clockwise as necessary in all 4 corners until your unit is level in all directions.
- Página 24 STEP 13 Locate the studs in the wall using a stud finder. Using a pencil, mark the stud locations at the top of the Upper Back Panel (H) and on the Stringer (I). You need to locate 2 studs (2 marks at the top &...
- Página 25 STEP 14 A ladder will be required. Do not lean against the top of the unit, it may cause sagging. (x4) First, make sure that your unit is still level in all directions. Drill 1/8" (3mm) pilot holes through the BACK Upper Back Panel (H) and through the Stringer (I) at the the stud locator marks.
- Página 26 STEP 15 (x2) (x6) SIDE SIDE Inner Slide Use these holes ameriwoodhome.com...
- Página 27 STEP 16 (x4) SIDE SIDE ameriwoodhome.com...
- Página 28 STEP 17 (x4) BACK SIDE SIDE ameriwoodhome.com...
- Página 29 STEP 18 (x4) SIDE SIDE ameriwoodhome.com...
- Página 30 STEP 19 Install drawers by engaging the inner slides (attached to the Drawer Sides) with the outer slides (attached to the Left and Right Panel). Push in until the plastic lever snaps into the outer slide. Outer Slide Note: To adjust Drawer Front, loosen screws (5), make needed adjustments and retighten.
- Página 31 STEP 20 (x8) finished edge finished edge ameriwoodhome.com...
- Página 32 STEP 21 (x8) (x4) (x4) ameriwoodhome.com...
- Página 33 Upper and lower doors are reversible steps 22 - 25 show how to hang doors on the left side. Reverse these steps to hang doors on the right. Doors open to left. Doors open to right. ameriwoodhome.com...
- Página 34 STEP 22 (x4) Arrow faces front of unit. ameriwoodhome.com...
- Página 35 STEP 23 Eccentric adjustment screw. Shifts the whole hinge up and down. Adjust the gaps between the door and the left and right panels (side to side) Adjust the gaps between the face of the door and the front edge of the left and right panels when in the closed position.
- Página 36 STEP 24 (x1) (x1) (x2) May need to adjust screw. Door should pop out when pressed in. If door does not open, adjust screw until it does. ameriwoodhome.com...
- Página 37 STEP 25 This step is optional... Place Glissando Soft Close (17) on the lower hinge of each door. ameriwoodhome.com...
- Página 38 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 10 lbs (4.54 kg) Upper Adjustable Shelf 40 lbs (18.18 kg) Upper Fixed Shelf 40 lbs (18.18 kg) Lower Adjustable Shelf 40 lbs (18.18 kg)
- Página 39 Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback. ameriwoodhome.com...
- Página 40 Espa ol Cubierta Delantera Este libro de instrucciones contiene informaci n IMPORTANTE de seguridad. Por favor lea y mant ngalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda.
- Página 41 Espa ol P gina 5 - Lista de tablas P gina 8 - Lista de piezas No es el tama o real Tama o real Panel izquierdo (A) Seguro de leva (1) Panel derecho (B) Perno de leva (2) Parte superior (C) Tarugo de madera (3) Estante superior ajustable (D) Tornillo confirmat (4)
- Página 42 Espa ol P gina 16 - Aseg rese de que los agujeros est n hacia arriba en la parte posterior del riel trasero (J). P gina 18 - Lado sin terminar *Deslice el panel trasero en las ranuras de los paneles izquierdo y derecho (A y B). *Alinee los agujeros en la parte inferior del panel trasero con los agujeros en la parte superior del riel trasero (J) P gina 20 - Deslice las cu as (6) en la ranura contra el panel trasero y aseg relas con un tornillo.
- Página 43 Espa ol P gina 26 *Corredera interior *Utilice estos agujeros P gina 30 - Instale el caj n acoplando las correderas interiores (fijadas a los laterales del caj n) con las correderas exteriores (fijadas a los paneles izquierdo y derecho). Empuje hasta que la palanca de pl stico encaje en la corredera exterior.
- Página 44 Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios! Nos gustar a enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el tiempo de ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias ameriwoodhome.com...
- Página 45 Fran ais Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA S CURIT . VEUILLEZ LIRE ET GARDER POUR UNE R F RENCE FUTURE Ne retournez pas ce produit! Contactez notre quipe de service la client le amicale d'abord pour obtenir de l'aide.
- Página 46 Fran ais Page 5 - Identification de Ia planche Page 8 - Liste des pi ces Taille non r elle Taille r elle Panneau gauche (A) Verrou de came (1) Panneau droit (B) Boulon came (2) Dessus (C) Cheville en bois (3) Tablette r glable sup rieure (D) Vis Confirmat (4) Tablette inf rieure r glable (E)
- Página 47 Fran ais Page 16 - Assurez-vous que les trous sont orient s vers le haut sur la face arri re du rail arri re (J). Page 18 - C t non fini *Faites glisser le panneau arri re dans les rainures des panneaux gauche et droit (A et B). *Alignez les trous en bas du panneau arri re avec les trous en haut du rail arri re (J).
- Página 48 Fran ais Page 25 - Une chelle sera n cessaire. Ne vous appuyez pas sur la partie sup rieure de l'appareil, cela pourrait provoquer un affaissement. *Pour cela, il faut d'abord s'assurer que l'unit est toujours niveau dans toutes les directions. *Percez des avant-trous de 3 mm (1/8") travers le panneau arri re sup rieur (H) et travers le limon (I) au niveau des marques de rep rage des goujons.
- Página 49 Visitez le site Web de votre d taillant local, valuez votre produit achet et laissez-nous quelques commentaires ! Nous tenons offrir un grand "Merci" tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires pr cieux. Merci ameriwoodhome.com...