44
BOX CONTENTS
•
Carefully remove products and accessories from the box. Make sure all items are included.
•
Inspect the product carefully to make sure it has not suffered any breakage or damage during transport.
•
Do not discard the packaging material until you have thoroughly inspected the product and used it satisfactorily.
ATTENTION: If any part is missing or damaged, contact the Authorised Service Centre. Do not
use this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.
ASSEMBLY
REAR AND FRONT TUBE
1.
Place the lower tube into the upper tube, note that both the upper and lower tubes have a guide groove.
2.
Screw on the shaft coupler so that the upper and lower tubes do not swing.
1.
Loosen the coupler from the shaft, remove the lower tube to separate the upper and lower tube.
x 1
x 1
x 1
1
2
x 1
x 1
2
1