Publicidad
SAFETY INFORMATION
10
12
WARNING The longer cord should be arranged so that it will not drape over the
countertop or tabletop where it can be tripped over, snagged, or pulled on unintentionally
(especially by children).
PREPARATION
Know Your Heat gun
This tool is designated with a rated input of 1500 Watts under power supply 120 V AC~, 60 Hz.
This tool has been designed for stripping paint, soldering pipes, shrinking PVC, welding and
bending plastics as well as general drying and thawing purposes.
This tool must not be used on clothing or drying the hair or other body parts of pets and
humans.
This tool is intended for private domestic use only.
WARNING
• DO NOT allow familiarity with the tool to cause carelessness. Remember that one careless
moment is enough to cause severe injury.
• DO NOT attempt to modify this tool or create accessories not recommended for use with this
leading to possible serious personal injury.
• DO NOT
• DO NOT let children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
FUNCTIONS AND ADJUSTMENTS
WARNING To reduce the risk of serious personal injury, turn the tool off and disconnect
it from power source before making any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
1. Two Speed Switch
The position of the two speed switch (I) controls both
the fan speed and the heat output of the gun.
• To turn the tool on in low speed, low heat, slide the
two speed switch (I) to the position marked "I".
• To turn the tool on in high speed, high heat, slide the
two speed switch (I) to the position marked "II".
• To turn the tool off, slide the two speed switch (I) to
the position marked "O".
2. Temperature Adjustment Knob
The air temperature can be adjusted to suit a wide
range of applications.
• Turn the temperature adjustment knob (E) clockwise
to align the bigger number with the indication triangle
to obtain higher heat.
• Turn the temperature adjustment knob (E)
counterclockwise to align the smaller number with
the indication triangle to obtain lower heat.
KOBALT_Hot Air Gun_GB_IM_V03.indd 9
12
16
16
14
9
16
14
12
Not Recommened
1
I
2
12
E
11/22/22 10:35 AM
Publicidad
