Before you call for service...
Troubleshooting tips
Problem
Possible Causes
What To Do
NOWater
Water supply valve
• Turn water supply valve on. See diagram on page 11.
not
turned
on.
After filter change,
• It takes .%4 hours for RO system to provide enough
tank is empty,
waler m fill file tank.
Leaksat fittings
Improperly
installed.
• Reinstall. See Installation lnstrucfiuns.
Sounds youmayhear
Sink drain, drain water
• This is normal.
from system.
• Drain line can be installed Io an alternative drain,
such as a tya_sement drain. See pages 15 and 16
for aherImfive drain configurafioIls.
Faucet air gap--draln
water
• Install a pressure regulalor in the house water supply
flowing through the faucet
system to reduce the pressure below 90 psi.
air gap. This may be associated
with high pressure water supply,
generally 90 psi or greater.
• _
allernafive flow reslrictor for high pressure
inslallafions is m_lable from GE (see item #31 on the
parts list, page 25). Contact GE Parts aa_d ask for Flow
Reslricmr, High Pressure, Part Number WS15X10049.
22