Masterpro i-ROCKET 500 Manual De Instrucciones página 9

EN
HOW TO USE
Using instruction for this air fryer.
STEP 1: Connect the main plug to a grounded power outlet.
STEP 2: Use the basket handle and pull the basket out of the air
fryer.
STEP 3: Place the ingredients in the basket.
Note: Do not exceed the MAX indication (see section 'settings' in
this chapter), as it may affect the quality of the food.
STEP 4: Reinsert the basket back into the fryer and close it.
STEP 5: Set the appropriate temperature. Refer to the "Settings"
section of this chapter to determine the appropriate temperature.
STEP 6: Determine the required preparation time for the ingredient
(see section 'Settings' in this chapter).
STEP 7: To switch on the appliance, set the time to the required
preparation time.
Add 3 minutes to preparation time if the appliance is cold.
Note: If desired, you can also preheat the appliance without any
ingredients inside. In this case, set the time to 3 minutes and wait
for the countdown to end. Then fill the basket and set the desired
preparation time, then press start.
STEP 8: Some ingredients need to be shaken halfway through the
preparation time (see section "Settings" in this chapter). To do this,
remove the basket from the appliance by the handle and shake it.
Then put the basket back into the air fryer.
9