EN
Always use a power outlet that is grounded.
■
Unplug the power cord when cleaning or when not in use.
■
Do not operate with wet hands. Prevent water from spilling onto
■
the unit.
■
liquid.
Do not leave the unit running unattended. Do not tilt or turn
■
over the unit.
Do not unplug while the unit is operating.
■
Do not unplug by pulling on the power cord.
■
■
■
Do not climb or sit on the unit.
■
■
Do not touch the air inlet or the aluminum fins of the unit.
■
Do not operate the unit if it is dropped, damaged or showing
■
signs of product malfunction.
Do not clean the appliance with any chemicals.
■
■
The unit shall be installed in accordance with national wiring
■
regulations.
Do not use means to accelerate the defrosting process or to
■
clean.
The appliance shall be stored in a room without continuously
■
appliance or an operating electric heater).
06
The appliance shall be stored so as to prevent mechanical
■
damage from occurring.
Do not piece or burn, even after use.
■
Be aware that refrigerants may not contain an odour.
■
Pipe-work shall be protected from physical damage and shall not
■
be installed in an unventilated space, if that space is smaller than
9m².
Compliance with national gas regulations shall be observed.
■
Keep any required ventilation openings clear of obstruction.
■
The appliance shall be stored in a well-ventilated area where the
■
room size corresponds to the room area as specified for operation.
Any person who is involved with working on or
breaking into a refrigerant circuit should hold a
current valid certificate from an
industry-accredited assessment authority,
which authorizes their competence to handle
refrigerants safely in accordance with an
industry, recognized assessment specification.
Servicing shall only be performed by qualified
technician. Maintenance and repair requiring
the assistance of other skilled personnel shall
be carried out under the supervision of the
person competent in the use of flammable
refrigerants.
If you don't understand something or need help, please
contact the customer service department for help first.
07