Tabla De Contenido; Meanings Of Symbols - Tanaka TCS 27EPAP Manual De Instrucciones

English

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Symbols
The following show symbols used for the machine. Be sure that you understand their meaning
before use.
It is important that you read, fully
understand and obser ve the
following safety precautions and
warnings. Careless or improper
use of the unit may cause serious
or fatal injury.
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Always wear eye, head and ear
protectors when using this unit.
Choke - Run position (Open)
Choke - Start position (Closed)
Emergency stop
Hot surface
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".
Index
WHAT IS WHAT ..........................................................3
WARNINGS AND SAFETY INSTRUCTIONS ............4
SPECIFICATIONS ......................................................6
ASSEMBLY PROCEDURES ......................................6
OPERATING PROCEDURES .....................................8
MAINTENANCE .......................................................11
2
WARNING
15 m
50 FT
Keep all children, bystanders and helpers
50 ft (15 m) away from the unit. If anyone
approaches you, stop the engine and cutting
attachment immediately.
All overhead electrical
communications wires can have electricity flow
with high voltages. Never touch wires directly or
indirectly when pruning, otherwise serious
injury or death may result
conductors and