WerkaPro SL-78-01 Instrucciones De Uso página 3

English
Precautions for use
When using this product for the first time, place it in a place with sufficient sunlight to charge it. Several hours of
-
charging are required before you can use the product.
Weather conditions or the position in which the product is installed may affect charging efficiency and charging time.
-
The LED lamp will not light up if the operating switch is in the off position, even if the product is exposed to light.
-
For the LED lamp to stay on for longer, it should be installed in a place with a lot of sunlight so that the projector can
-
absorb as much as possible.
We advise you to activate mode 1 of the solar floodlight during the winter or if there is little sunlight.
-
You need to adjust the angle of the solar floodlight and the direction of the light for the product to work optimally. The
-
recommended height is 2-3 metres.
If you are not going to be using the product for a long time, it is advisable to leave it in a sunny area. To preserve the
-
battery, we recommend that you fully recharge the solar floodlight once a month. Allow a full day for the solar floodlight
to be fully charged.
Instructions for use
You must expose the solar floodlight to direct sunlight in order to recharge the product's built-in battery. In this way,
-
sunlight will be converted by the projector into solar energy.
Place the solar floodlight in the place you want to light: path, garage, backyard, etc. Make sure you position the solar
-
floodlight so that it is exposed to as much sunlight as possible, whatever the location.
Mode 1 corresponds to an automatic detection mode: when this mode is activated, the LED lamp will light up as soon
-
as it detects the presence of a body. The lamp will automatically switch off 15 seconds after it no longer detects a body.
To activate this mode, press for at least one second.
Mode 2 is identical to mode 1 but the LED lamp will not go out when it no longer detects a body: it will emit a constant
-
dim light. The light will be stronger and more intense when the lamp detects a body.
Mode 3 takes no account of the presence or absence of a body. With mode 3 activated, the lamp emits a permanently
-
dim light.
Technical specifications
Product name
Reference
Output
Battery capacity
Sensor angle
Induction distance
Lumen
Number of LEDs
Solar floodlight 2 led heads 300lm
11336/ SL-78-01
5.0 V, 2.5 W, 250 mAh
2000mAh
120 degrees
3-5 meters
300 LM
78LED