Sony ID Telephone IT-ID500 Manual De Instrucciones página 19

@ If you use a Private Branch Exchange (PBX) —
You need to dial a digit (such as 9) to access an outside line before
you dial a phone number. To store the phone number:
1 Enter the outside line access digit.
2 Press REDIAL/PAUSE to enter a pause (to allow the phone
time to the access outside line).
3 Enter the phone number you want to store.
] @ To keep a directory
To replace the clear panel, slip Press OPEN, remove the clear panel and take out the directory.
the tabs into the openings on the
Write down the name or places whose numbers you have stored
phone and push down on the left
and replace the directory and clear panel onto the phone.
Directory
OPEN button
@ Using the one-touch dialing buttons for
special services
If you subscribe to special services offered by your telephone
company (such as message service), you can store the access
codes into one of the 20 one-touch dialing buttons by using the
same procedure. Just enter the access codes instead of a phone
number. This will provide additional convenience in using them.
WHEL dials Mr: Molatcmacele(dameolt-lilate mer] 1
2 Press the desired one-touch dialing button (1 to
20).
The phone number stored in the button appears on the
display and will be dialed.
Using as a telephone | 1