water intake
7
.
nOTE: Before use, gently tug on the suction hose
ensure the connection is secured.
2. Place the end of suction hose with filter on it into
container of fresh water or a fresh water source. Adjust
the float ball
on the suction hose so the quick connect
21
suction hose filter
10
3. Select the correct nozzle to be used.
Attaching Quick Connect Hose Adapter and
Garden Hose (Fig. H)
A garden hose can only be attached when the quick connect
hose adapter
20
is installed.
nOTE: Before connecting the garden hose to the power
cleaner, run water through the garden hose for thirty
seconds to clear any debris from the mouth of the garden
pressure hose.
1. To connect the quick connect hose adapter
power cleaner
6
, place the quick connect end of the
quick connect hose adapter
2. Thread a garden hose to the threaded end of the quick
connect hose adapter
nOTE: Avoid cross threading when installing the garden
hose. Cross threading will cause leaks.
3. Always disconnect the garden hose after usage. To
disconnect, unthread the garden hose from the end of
the quick connect hose adapter
quick connect end of the quick connect hose adapter
and remove from the water intake
Attaching High Pressure Foam Cannon
(Fig. I)
1. To connect the high pressure foam cannon
the spray wand
11
, pull the quick connect collar
toward the spray wand and insert the high pressure
foam cannon
18
.
2. Release the quick connect collar
pressure foam cannon
3. Give the high pressure foam cannon
the quick connect collar has locked into place to ensure
the high pressure foam cannon
4. To adjust the rate of foam, rotate the pressure
control knob
on the top of the high pressure
30
foam cannon
counterclockwise for less or clockwise
18
for more foam.
nOTE: The bottle of the high pressure foam
cannon
18
should be positioned underneath the spray
wand. Do not position the bottle of the high pressure
foam cannon
18
above the spray wand as this will lead
to soap dripping on the spray wand. The spray tip on
the high pressure foam cannon
horizontal application.
stays covered by the water.
20
20
onto the water intake
and tighten by hand.
20
20
and pull back the
7
.
18
to lock the high
12
in place.
18
18
a firm tug after
18
is locked into place.
18
rotates for vertical or
To Attach Nozzle to Spray Wand (Fig. J)
19
to
DANGER: Risk of fluid injection. Do not direct discharge
stream toward persons, unprotected skin, eyes or any
pets or animals. Serious injury will occur.
WARNING: Flying objects could cause risk of serious
injury. DO NOT attempt to change nozzles while power
cleaner is running. Turn power cleaner off before
changing nozzles.
To connect the nozzle to the spray wand
connect collar
appropriate nozzle. Release the quick connect collar to lock
the nozzle in place.
To ensure nozzle is locked into place, give the nozzle a firm
tug after the quick connect collar has locked into place.
How To Use Spray Wand
Refer to the following chart to choose the correct nozzle for the
job to be performed.
to the
CAUTION: Do not attempt to move the nozzle to
adjust pressure. The turbo nozzle is NOT adjustable.
7
.
nozzle
Color
Turbo
Spray
Nozzle
20
15˚
Yellow
to
25˚
12
Green
40˚
White
*NOTICE: The high pressure spray from your power
cleaner is capable of causing damage to surfaces
such as wood, glass, automobile paint, auto striping
and trim, and delicate objects such as flowers and
shrubs. Before spraying, check the item to be cleaned
to assure yourself that it is strong enough to resist
damage from the force of the spray.
Attaching and Adjusting the Shoulder
Strap (Fig. K)
WARNING: The shoulder strap should only be slung
over one shoulder and not across the body. See Fig K.
A shoulder strap
weight exceeding 13 lbs. (6 kg). (Total weight includes the
12
toward the spray wand and insert the
spray Pattern
Uses
Delivers
the optimal
cleaning
effect for
the toughest
cleaning
tasks.
Intense
cleaning of
unpainted
hard
surfaces
Intense
cleaning of
larger areas
Cleaning
of painted
or delicate
surfaces
24
is required for any tool with a total
English
11
, pull the quick
surfaces*
Cleaning brick,
concrete, and vinyl
surfaces. DO NOT use
on fabric.
Grills, driveways,
concrete or brick
walkways, unpainted
brick or stucco
Metal, concrete or
wood
Auto/RV, marine,
wood, painted brick
and stucco, vinyl,
painted siding
11