LUND 68360 Manual Original página 7

Báscula de cocina

Idiomas disponibles

Weight measurement

After turning on and possibly taring the scale, place the product on the measuring surface. Its weight will be displayed in the

selected weight unit.

If there is a need to weigh subsequent products without removing the previous ones from the measuring surface, e.g., when

adding ingredients to a meal then after weighing one product, press the TARE button, check that the display shows 0 and then

add another product to be weighed.

Ensure that the sum of the weights of the products placed on the measuring surface does not exceed the maximum capacity of the

scale. If the display shows the EEEE symbol, it means that the maximum capacity of the scale has been exceeded.

After ﬁ nishing weighing, turn oﬀ the scale and commence its maintenance.

PRODUCT MAINTENANCE AND STORAGE

If the measuring surface or the scale vessel gets dirty, clean it as soon as possible with a soft cloth soaked in water with dish soap.

Then remove any remaining liquid with a damp cloth and dry or leave to dry. If the measuring surface or the scale vessel can be

dismantled, clean them under running water using dish soap. The removable scale vessels are not dishwasher safe. The surface

of the vessels may be scratched or become matt.

Do not clean the product with abrasive agents, alcohol, solvents, or corrosive agents. Always remove the batteries from the com-

partment during cleaning. Reinstall the batteries after the product is completely dry.

Do not clean the scale by immersing it in water or any other liquid.

Store the product indoors under the conditions listed in the "TECHNICAL DATA" section. The place of storage should prevent

access to the product by children.

If the product will not be used for a longer time, remove the batteries from the compartment and store the product in the packaging.

It is recommended to store the product in the packaging supplied with the product.

It is recommended to transport the product in the packaging supplied with the product.

O R I G I N A L

I N S T R U C T I O N S