Publicidad
Idiomas disponibles
Idiomas disponibles
_.
"UNIT"
installment
in Bracket
Base
Remove 4 screws from the lower right and left parts
of outer panel, place "UNIT" in Bracket Base and
secure using (4) screws previously removed.
2. installment
of Left Bracket
Assemble the Left Bracket to outer panel and
secure with (W') screw provided.
3. Fixing 'location
screw' in cabinet
Fix (1) screw at the bottom of cabinet with use of
template 1 to Ioate position of screw in cabinet.
4. "UNIT"
installment
in cabinet
Push "UNIT" into the cabinet aligning fixed screw in
cabinet with hole in center rear of Bottom Bracket.
Push "UNIT" in until the front of Bracket Base
touches front of cabinet.
5. installment
of Bottom
Bracket
Place Bottom Bracket on Bracket Base
(Reference B) Make holes of position A fit to
Bracket Base's. Drill pilot hole with a 7/64 or #35
drill bit and secure Bottom Bracket with screws
provided.
6. installment
of Top Bracket
With template 2, make 2 holes each at the upper
right and left parts of cabinet. (Others for the extra)
Secure "Top Bracket" according to the holes.
Publicidad
