Volkswagen RMT200 Instrucciones De Manejo página 119

BDA 051 228 A BA Radio RMT 200.book Seite 119 Freitag, 20. Juli 2012 12:21 12
Bluetooth volume (BVOL)
The maximum switching on volume for playback via Bluetooth audio can be set and saved. This permits
an adaption to be carried out on different Bluetooth devices.
In the BLUETOOTH menu, press the
Set the desired playback volume using the rotary knob Fig. 1
BVOL MAX).
During the playback of music tracks via Bluetooth audio, the volume can still be set as usual using the
1
rotary knob Fig. 1 .
Call tone volume (RVOL)
During an incoming call, the current audio playback is interrupted and the call tone is played back via the
vehicle speakers. The playback volume of the call tone can be set.
In the BLUETOOTH menu, press the
Set the desired call tone volume using the rotary knob Fig. 1
The call tone volume can be adjusted during an incoming call using the rotary knob Fig. 1
settings are saved for the following phone calls.
Hands-free system
Accepting, making and ending a call
An incoming call is shown on the display of the radio. The call tone is played back via the loudspeakers
of the vehicle. The telephone book entry is shown in the display if the caller is saved in the telephone
book. The phone call can be accepted using the
REJECT
the function button.
In order to conduct a phone call, the connection can be established using the control element of the
radio (see below "Select saved caller number").
HS
Using the function button, you are able to transfer a current call from the hands-free system to the
mobile phone.
In order to conduct the call back using the hands-free system, press the function button
The hands-free system is active again as soon as a call transferred to the mobile phone has been
ended.
The call can be ended using the
Setting the playback volume of the hands-free system
Calls performed via the hands-free system of the radio are played back using the preset volume via the
vehicles loudspeakers. Using the rotary knob Fig. 1
call. The subsequent calls are played back with this volume.
Select a call number from the telephone book (CALL)
Phone book entries (see "Transferring the phone book"
control element of the radio.
MODE
Keep the button pressed until the name of the coupled mobile phone is shown in the display.
CALL
Press the function button.
Using the rotary knob Fig. 1
SEL
the function button.
The standard number of the participant is displayed. If several telephone numbers are saved for this
participant in the phone book, these can be selected using the rotary knob Fig. 1
In order to establish the connection to the displayed call number, press the
Starting the call can be cancelled using the
119
MENU
button and then the
MENU
button and then the
ACCEPT
function button or rejected using
function button.
1
you are able to change the volume during the
Page 118) can be selected directly via the
1
select the desired call number from the phone book and call up using
function button.
BVOL
function button.
1
(BVOL 06...31 or BVOL MIN/
RVOL
function button.
1
(RINGVOL 03...10).
1
HF
.
1
.
CALL
function button.
. These