Publicidad
Idiomas disponibles
Idiomas disponibles
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 34
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3
Description
3.1
Product overview
3.2
Intended use
The product described is a cordless plunge-cut circular saw. It is designed for cutting and for making
plunge-cuts exclusively in the following materials:
•
Wood and wood-like materials
•
Plastics
*2373402*
1
2373402
Auxiliary handle
@
Latching lever for changing saw blade
;
Switch-on interlock
=
Main grip
%
Release button for cutting angle -1° and 47°
&
Adjusting knob for equalizing play
(
(play between guide rail and guide groove in
the base plate)
Hex key
)
Adjusting knob for saw blade speed
+
Spindle lock button
§
On/off switch
/
Chip ejector / hose connector
:
Installation flap for changing saw blade
∙
Mounting flange
$
Clamping flange
£
Clamping screw
|
Parallel guide
¡
Movable dust shield window
Q
Base plate
W
Cutting depth adjustment
E
Clamping screw for parallel guide
R
Clamping screw for cutting angle adjustment
T
Adaptive cutting line indicator
Z
Battery
U
Battery status indicator
I
Release button, battery
O
English
25
Publicidad
