THOMSON WEAR 77032 Instrucciones De Uso página 6

5. Charging
Fully charge the earphones and the charging box once before using them for the first time
1
Insert the earphones and connect the charging box
Place the earphones in the charging box Ensure that the earphones are inserted into the correct
sides, using the L/R markings as a guide
Connect the USB charging cable included to the charging socket (6) on the charging box
Connect the free plug on the USB-C charging cable to a suitable USB charger To do this, consult
the operating instructions for the USB charger you are using
Charging procedure for the charging box and earphones
2
The status LEDs on the charging box (2) light up white during the charging process After the
charging box is fully charged, the 4 LEDs on the charging box light up solid white
The status LEDs of the earphones (3) light up solid white during the charging process After the
earphones are fully charged, the status LEDs go out
It can take up to 15 hours (earphones) or up to 2 hours (charging box) until the batteries are fully
charged
CHARGING
3
Battery capacity
Charging box
100% – 75%
When battery levels are low (< 5%), the first of the four status LED (2) flashes white
Earphones
When battery levels are low (< 20%), the announcement "Battery Low" is heard every 2 minutes
The actual battery life will vary depending on how you use the device, the settings and the ambient
temperatures (rechargeable batteries have a limited life)
Note
If you have not used the device for a few months, it can take up to 15 - 30 minutes until the
status LED (2/3) lights up white during the charging process
2
:00
h m
1
:30
h m
75% – 50% 50% – 25%
USB-C
CHARGED
25% – 0%
4