Delta Q MILKQOOL Manual De Instrucciones página 81

Fig. 23: Connect the milk suction to
the milk system.
Fig. 24: Place the milk suction into a
milk package.
PREPARING A GALÃO - CAPPUCCINO
Milk suction tube
Note: Rinse the milk tank thoroughly before reusing it.
• Pour milk into the milk tank according to the desired amount (see Fig. 19).
Note: To obtain a perfect milk foam use semi-skimmed milk at the
refrigerator temperature.
• Connect the milk suction tube to the milk system (see Fig. 23).
• Place the other end of the milk suction tube into a milk package
(see Fig. 24).
• Raise the lever to its full extent and insert a Delta Q coffee capsule in
the capsule housing hole, in accordance with the housing silhouette.
Completely lower the lever (see Fig. 9).
• Place a glass of galão (black coffee and 3/4 milk) or a Cappuccino cup
(with capacity exceeding 190cc) under the extraction nozzle.
• Adjust the selector to the Galão or Cappuccino position according to
the desired beverage (see Fig. 21).
• Press the Milk-based beverage button (see Fig. 22).
Note: For Galão, the beverage preparation starts as follows (first the
coffee, followed by a brief pause, and then the milk).
For Cappuccino, the beverage preparation starts as follows (first the milk
foam and then the coffee).
• You are recommended to lift the lever again at the end of the extraction
process to release the capsule into the used capsule tank.
Lower the lever into its resting position.
Note: In order for the milk system to operate perfectly, It must be rinsed
and cleaned after each use (see page 84).
MILKQOOL
81