Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
No sound
- Ensure that the mains adapter is pushed fully into the power outlet and
that its cable is properly connected to the DC IN connector on the trans-
mitter.
- Ensure that the headset receiver power ON/OFF switch is switched to ON.
- The charge level of the batteries inside headset receiver may be too low.
Recharge the batteries or replace them with the (fully charged) spare bat-
teries.
- Ensure that the TV set, Hi-Fi system or audio component is switched ON
and set to a channel that broadcasts an audio signal.
- If you record the audio signal for the transmitter from a headphone jack
on a radio/CD player, etc., please check whether this output is controlled
via a volume control. If necessary, turn the volume up on this output.
- Use the volume control on the headset receiver to increase the sound
level.
- If the above steps do not help, please look under the point "The radio con-
nection between the transmitter and receiver is defective".
Distortion
- The charge level of the batteries inside headset receiver may be too low.
Recharge the batteries or replace them with the (fully charged) spare bat-
teries.
- The headset receiver may be too far away from the transmitter. Move clo-
ser to it.
- If you record the audio signal for the transmitter from a headphone jack
on a radio/CD player, etc., please check whether this output is controlled
via a volume control. If necessary, turn the volume up on this output.
(See page 29 for costs and hours of operation)
Helpline UK 0844 800 6503
O
PERATION
23
Publicidad
