Metabo LC 60 Instrucciones De Manejo página 4

ENGLISH
ENG
8 Fault
8.1 Warning display (3) lights up
continuously
• Battery pack is not charged. Excessive/Insuffi-
cient temperature. When the temperature of the
battery pack is between 0 °C and 50 °C, the
charging process begins automatically.
8.2 Warning display (3) flashes
• Battery pack is defective. Remove the battery
pack immediately from the charger.
• Short circuit between the charging contacts.
Check the contacts for foreign bodies.
9 Repairs
Repairs to the charger must only be carried out by
qualified electricians.
If the mains connection cable of this tool is
damaged, in order to prevent endangering
personnel and property it must be replaced by the
manufacturer, or the Customer Service of the
manufacturer, or a similarly qualified person.
Metabo chargers requiring repairs can be sent to
the address on the next to the last page. Please
enclose a description of the fault with the power
tool.
4
10 Environmental Protection
Metabo's packaging can be 100% recycled.
Worn out chargers and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
11 Technical Specifications
Changes due to technological progress reserved.
Voltage ranges of the battery packs ....... = 7.2 V
Charging current ..................................... = 2.4 A
)
Charging time (Li-ion battery pack,
2.2 Ah) ..................................................... = 60 min
1)
Depending on the residual capacity and the
temperature of the battery pack, real charging
times may deviate from the specifications.
Metabowerke GmbH
Postfach 1229
Metabo-Allee 1
D-72622 Nürtingen
Germany