Kenmore 461.62302 Guía De Uso Y Cuidado página 5

DOOR REVERSAL iNSTRUCTiONS
Caution: To avoid personal injury to yourself and/or property, we recommend someone assist you during
the door reversal process.
1) To access the lower hinge assembly, tilt back the
refrigerator or lay it on its back (Fig. A).
2) Remove (unscrew) both leveling legs located at the front
of the unit (Fig. A).
3) Using a Phillipshead screwdriver, remove the screws
holding the lower hinge assembly to the unit (Fig. A).
4) Remove the main door assembly from the refrigerator
(open door and pull down).
5) Remove (unscrew) the main door top hinge pin (Fig. B).
6) Re-install the main door top hinge pin on the opposite
side of the unit.
7) Remove the door plug and door bushing located on the
top of the main door assembly.
LEVELLING
LEG
Fig. A
MOVE
LOWER
HINGE TO
OPPOSITE
SIDE
8) Interchange positions (ie. door plug right side, door
bushing left side).
9) Re-install main door assembly on the refrigerator.
1O) Remove door bushing (bottom door) and install on
the opposite side (Fig. A).
1 1) Re-install the lower hinge assembly on the opposite side.
12) Make sure the door assembly is properly aligned on
the unit before tightening lower hinge screws.
13) Re-install both leveling legs.
REMOVE DOOR PLUG AND DOOR
BUSHING, INTERCHANGE POSITIONS.
Fig. B
The process is now complete.
4