Publicidad
Idiomas disponibles
Idiomas disponibles
en
14 Appendix
14 Appendix
14.1
EC Declaration of Conformity
14.2
Commissioning protocol
Description of the appliance
Range
Model
Software version
Inspection points
Position of the water heater, distance from the wall
Circulation direction of the refrigerant fluids
Tightness of the refrigerant fittings
Pressure during evacuation prior to filling
Evacuation time and outside temperature during evacuation
Inspection points
Presence of the recommended circuit breaker (curve D)
Tightened terminal blocks
Separation of the power and low voltage cables
Mounting and positioning of the sensors
Inspection points
Check the tightness of the connections
Check the water pressure
No faults on the regulator
Check the domestic hot water temperature to ensure that the appliance is working cor
rectly.
If the readout value is incorrect, check the positioning of the sensor in the sensor tube
Compressor start-up
Transfer of heat to the domestic hot water tank
Back-up heating working
Instruct the user in how the product operates
228
ETWH
The unit complies with the standard type described in the EC declaration
of conformity. It has been manufactured and put into circulation in
accordance with the requirements of the European Directives.
The original declaration of conformity is available from the manufacturer.
14.2.1
Appliance concerned
Please fill in
14.2.2
General checks
14.2.3
Electrical checks
14.2.4
Points to check after commissioning
Checked?
Checked?
Checked?
7659610 - v04 - 27072020
Publicidad
