Publicidad
INTRODUCTION
Thank you for purchasing the SubZero SZ-MA35 35W Modelling Combo Amplifier.
To help you get the most out of your new product, please read this manual carefully.
INSTRUCTIONS
INPUT - Input socket to connect with your guitar using a 6.5mm jack cable.
CLEAN VOLUME use this dial to control the overall volume of the clean channel
CLEAN LAMP This lamp illuminates when the clean channel has been selected.
CHANNEL SELECT BUTTON Press this button to toggle between the clean channel and the drive channel.
DRIVE LAMP - This lamp illuminates when the drive channel has been selected.
DRIVE GAIN Use this dial to change the amount of volume going to the amplifier. Turn clockwise for more distortion, turn
anticlockwise for less.
DRIVE LEVEL use this dial to control the overall volume of the drive channel.
BASS use this dial to adjust the low frequency level, with a cut/boost of +/-15dB
MID use this dial to adjust the middle frequency level, with a cut/boost of +/-15dB.
MID FREQ use this dial to adjust the frequency of the mid frequency controlled by MID dial (9). Fully anticlockwise = 200Hz,
fully clockwise = 5KHz.
HIGH use this dial to adjust the high frequency level, with a cut/boost of +/-15dB
CHORUS use this dial to adjust the amount of chorus added to the output sound. Fully anticlockwise operates as OFF.
Publicidad
