DeLOCK 18645 Manual Del Usuario página 3

English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
1.
Connect all HDMI video sources to the HDMI input of the switch with optional
HDMI cables.
2.
Connect the output of the switch to the display.
3. Plug in the USB power cable to a USB Type-A port or power supply.
Operation
Press the "Select" button short to change the input channel, the input LED will
light green or blue.
Press the "Select" button for 3 seconds to change between manual switching or
automatic switching mode. The Auto mode LED indicator will display the status.
In Auto mode the switch will automatically select the active source when a source
device is turned on or plugged in. Once the source device is turned off or plugged
out, the switch will select the next power-on source automatically.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 07/2023
-3-