Publicidad
Idiomas disponibles
Idiomas disponibles
1
Introduce
The MIDI-USB USB to DMX Interface cable is a high-quality light control converter. DMX-
USB has DMX and RDM functions, which can convert DMX/RDM to USB and connect to
a computer. In addition, DMX-USB has a built-in high-speed isolator that can isolate and
protect computers and external light control equipment, and an external magnetic ring
shield can improve anti-interference ability.
Precautions
RDM is supported as standard on the DMX-USB. Remote Device Management (RDM) is a
protocol enhancement to DMX-USB that allows bi-directional communication between the DMX
USB Pro Mk2 and RDM compliant devices over a standard DMX line. This protocol will allow
configuration, status monitoring, and management of these devices.
Not all control software which has implemented the
DMX-USB as a device support RDM.
Interfaces Descriptions
1
1
3-Pin XLR plug - Connects RDM /
DMX equipment
2
USB Interface - Connects to
Computer's available USB 2.0 Port
3
USB Indicator - On when driver
installed and power connected
USB TO DMX Interface
3
4 5
4
IN - RDM Input Light (Flashes when
it gets data from RDM equipment)
5
OUT - Flashes when DMX data is
sent.
EN
2
Publicidad
