Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 12 Wiring connections
1. Before connecting the power cable to the dishwasher, make sure the circuit breaker is off.
2. Unfasten the screw on the left side of the junction box located at the front bottom
right of the dishwasher, and then open the junction box cover. (Figure 11)
3. In the junction box, find the three power wires from the dishwasher including the
grounding line.
4. Pass the power cable through the strain relief, and then into the junction box
(Figure 12).
5. Connect the black wire of the dishwasher to the black wire of the power cable by
inserting both into a wire nut, and then rotate the wire nut as shown in Figure 13.
Connect the white wire to the white wire and the green wire to the green in the same
manner.
6. Recheck each wire to ensure it is connected correctly and securely.
Each colored wire should be connected to the corresponding wire of the same color.
White should be connected to white, black to black, and green to green.
7. Arrange all the wires into the junction box, and then close the cover and fasten the
screw.
Figure 11
34
English
DW5000C_DW80CB507012AA_DD68-00260A-01_EN.indd 34
DW5000C_DW80CB507012AA_DD68-00260A-01_EN.indd 34
CAUTION
Make sure the wires are not pinched and
sticking out of the junction box.
2023-12-15
2023-12-15
5:18:12
5:18:12
Publicidad
