Publicidad
Idiomas disponibles
Idiomas disponibles
How to Get the Drinking Water
1.Push the water shank inward by the cup
2.When you put the hand shank inward, there will be
some water outflows,when the hand shank is in its
original position, no water outflows.
How to Remove and Clean up the Water Dispenser
First Step: remove
1.Take out the elements of the water box
Stick to both sides of the water box elements with both
of your hands,and draw out the elements of the
water box outwards through 45 above.
You can translate the water box (to the side of the user)
and get the elements when the elements are out
of water valve elements (when you move the box,
be sure that there is no water in it.)
2.Take down the seal ring of the water box elements
3.Step to remove the elements of water valve
Use the screwdriver and make the edge directs to the
water valve elements and then insert it in the free
place that highlights outskirt, rotates the screwdriver
clockwise or anticlockwise, with the screwdriver
moving, when it tops the penstock, extracts the water
valve elements by hands at the direction of above
45°(You can not remove the elements of water valve)
14
Publicidad
