Jata JBSC1195 Instrucciones De Uso página 10

• This appliance is designed for domestic use only.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• The hair dryer has two switches and one pusher that control the heat and the airflow.
• Connect the appliance to the mains.
• Push the power switch (4) to any of its two positions ( or
• Then press the power switch (3) to the desired position (
-(∫): Cold.
-(∫∫): Power 1.
-(∫∫∫): Power 2.
• The combination of both switches will give you a wide range of options as to the airflow and the heat of the
air.
• If you wish to use only cold air while it is on, press the cold air pusher (2). Release it to get hot hair.
• The air concentrator (6) and the diffuser (7) are placed in the mouth of the dryer by pressure.
• Turn anti-clockwise to remove the grid of the diffuser and remove all the impurities.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning disconnect the appliance from the mains.
• You may clean it with a damp cloth and dry carefully afterwards.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
• It is very important to keep the air intake (1) and outlet grids always clean.
• Clean them frequently of any hairs or dust, which may get stuck to them.
• To proceed with cleaning the internal rear grille, pull the air inlet grille (1) to remove it.
• Once you have cleaned it, place it back in its original position, it will be held by the incorporated magnet.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
) to obtain a greater or lesser airflow.
-∫ -∫∫ -∫∫∫):
10