Jata JEBT1950 Instrucciones De Uso página 9

• Always disconnect it from the mains when you do not use it
and before assembling / disassembling or when cleaning.
• There are risks of injury in case of improper use. You must
be careful when handling the cutting blades, when the jug is
empty and during the cleaning.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• Remember that when you place or replace the stick, the blender must be disconnected from the mains.
• To insert the stick (5) into the body (4), make coincide the indication
) placed in the body. Next turn the stick counterclockwise to the ( ) position till the end to leave it correctly
fixed.
• To release the stick, turn it clockwise till the indication of the stick , coincide with the indication of the body
( ).
• Adjust the desired power with the selector (3).
• Put the stick into the foods and press the power pushers having in mind that:
- Pusher : Selected power.
- Pusher TURBO: Maximum power.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• The stick and the blade may be cleaned with soap and water. Try to do it as soon as you finish using it, because
dry texture and the texture of some foods are difficult to take out. Be careful while manipulate the blade.
• Clean the body of the blender with a dampened cloth. Never immerse in water.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
placed in the stick with the indication (
9