PNI CT36 PRO Manual Del Usuario página 15

6. The icon
on the screen, confirming that the pairing is complete.
7. Test the functionality by changing the set temperature
(SET) and watch the triggering of the relay in the receiver
unit.
Delete pairing
1. Turn off the receiver unit by briefly pressing the on/off
button. The two LEDs will turn off.
2. With the receiver off, press and hold the pairing and on/off
buttons at the same time until the two LEDs light up at once.
Release the buttons.
3. The "Power" LED stays lit, and the "Heating on" LED
flashes rarely.
4. The icon
Warning: first pair the two units and then add the thermostat to
the Tuya Smart application.
Lost or weak signal
In case of RF signal loss between the receiver unit and the central
unit, the icon
blinks for a few seconds, after which it remains
disappears from the screen of the central unit.
will disappear from the screen.
15 User manual