Klarstein HARRISON Manual Del Usuario página 40

EN
Modify weekly program
To make changes to the weekly program, do the following:
Press and hold the MENU button for 3 seconds to enter the weekly program modification
mode. Briefly press the UP or DOWN button to adjust the weekly program settings. A brief
press of the UP button activates the heater for the current segment. The display
3 seconds and then remains blank for 1 second. A brief press of the DOWN button deactivates
the heating for the current segment. The display
flashes for 1 second. To increase the time by 1 hour, press the UP button. The time flashes
during the setting process. When the time reaches 23:00, it jumps back to 00:00 for further
adjustments.
40
remains blank for 3 seconds and then
Example (see image): You want to set the heating
schedule for Monday from 07:00 to 23:00: Make
sure the thermostat is set to the week program for
Monday (P1).
Press and hold the MENU button for 3 seconds to
enter change mode. Use the UP button to set the
period from 07:00 to 23:00 and the DOWN button
for the other periods. After modification, press the
MENU button or wait 30 seconds without pressing
any button to continue heating.
Display of the current status
When the device is heating, the display
for 3 seconds and off for 1 second. When the device
is not heating, the display
and off for 3 seconds.
Example: In the image on the left, the current time
is 05:08 . Since there is heating at this point (see
heating symbol and arrow), the segment is switched
on for 3 seconds and switched off for 1 second.
flashes for
will be on
will be on for 1 second