physa PHY SMC 02 Manual De Instrucciones página 20

1. Auto mode
3. Auto mode for airbag
5. Airbag intensity
7. Shoulder airbag
9. Hand airbag
11. Leg airbag
13. Pause
15. ON/OFF switch
17. Heating
19. Lamp
21.
Seat drop / backrest lift
1. Automatic program: Press this button to select the automatic massage program, including 10 massage
programmes, followed by F1-F2-F3-F4-F5-F6-F7-F8-F9-FO for targeted massage. (See instructions on
the LCD screen for details).
2. Manual mode: Select massage type.
3. Auto mode for airbag: Activate or close the full-body airbag massage.
4. Massage strength: Adjustment of the pressure massage 1 / 2 / 3 / stop (available in manual mode).
5. Airbag intensity: Adjustment of airbag intensity.
6. Width adjustment: Adjustment of the width of the back massage: high, medium and narrow
respectively (available in manual mode).
7. Shoulder airbag: Open or close the shoulder airbag.
8. Interval fixed point: Adjustment of local and spot massage (available in manual mode).
9. Hand airbag: Switch the hand airbag on or off.
10. Press and hold this button to move upwards (available in manual mode).
11. Leg airbag: Turn the leg airbag on or off.
12. Press and hold this button to move downwards (available in manual mode).
13. Pause: Pause according to the massage function.
14. Time: Select one of the three time adjustment modes (10-20-30 min).
15. Standby button: Press the ON/OFF button to activate or deactivate the massage function. When the
power is on, press this button to adjust the chair to the initial angle and test your body shape within
10 seconds. You can press the button up or down to readjust the position of the arms and neck.
During body shape detection, the function button is locked and cannot be controlled. When finished,
EN
2. Manual mode
4. Massage strength
6. Width adjustment
8. Interval fixed point
10. Raising
12. Lowering
14. Timer
16. Foot Roller
18. Zero-gravity position
20. Foot speed massage
22.
Backrest drop / seat lift